Apr 07, 2025 Leave a message

How do I remove a broken key from the cylinder

A broken key stuck in a lock can be frustrating, but with patience and the right tools, you can safely extract it without damaging the cylinder. Here's how to do it:


​​Tools You'll Need​​

​​Tweezers or Needle-Nose Pliers​​ – For gripping exposed key fragments.

​​Broken Key Extractor Tool​​ – A specialized hook-shaped tool for locksmiths (available online).

​​Lubricant​​ – Graphite spray, silicone spray, or WD-40.

​​Thin Wire or Paperclip​​ – To create a DIY extractor.

​​Super Glue (Cyanoacrylate)​​ – Optional for bonding fragments.

​​Flashlight​​ – To inspect the keyhole.


​​Step 1: Stay Calm and Assess the Situation​​

​​DO NOT​​ force the key further in or try to turn the lock. This can push debris deeper or damage the pins.

Use a flashlight to check:

How much of the key is visible?

Is the broken edge accessible?


​​Step 2: Lubricate the Cylinder​​

Spray a ​​small amount of lubricant​​ (e.g., silicone spray) into the keyhole.

Wait 1–2 minutes to let the lubricant loosen the key and debris.

Gently jiggle the key fragment with your fingers to create movement.


​​Step 3: Extract the Key Fragment​​

​​Method 1: Tweezers or Pliers​​

If part of the key is sticking out, grip it firmly with tweezers or pliers.

Pull straight out slowly. Avoid twisting, which could snap the key further.

​​Method 2: DIY Extractor (Paperclip/Wire)​​

Unfold a paperclip into a straight wire with a tiny hook at the end.

Insert the hook into the ​​top of the keyhole​​ (above the key).

Slide the hook behind the key's teeth and gently pull upward.

​​Method 3: Broken Key Extractor Tool​​

Insert the tool's hook into the keyhole alongside the key.

Rotate the tool to catch the key's edge, then pull outward.

​​Method 4: Super Glue (Last Resort)​​

Apply a ​​tiny drop​​ of super glue to the broken key's exposed end.

Press a toothpick or thin rod against it and hold for 30 seconds.

Carefully pull the rod to extract the key.
⚠️ ​​Warning​​: Glue may seep into the lock and damage it. Use sparingly!


​​Step 4: Test the Lock​​

After removing the key, insert a spare key to check if the lock operates smoothly.

If the lock feels stiff or won't turn:

Spray more lubricant and work the key gently.

Debris may remain; repeat extraction or consult a locksmith.


​​Step 5: When to Call a Professional​​

Contact a locksmith if:

The key fragment is ​​deep inside​​ with no exposed edges.

DIY methods damage the pins or cylinder.

The lock is high-security (e.g., Mul-T-Lock, Abloy) and requires specialized tools.


​​Preventing Future Key Breaks​​

​​Replace Worn Keys​​: Faded or bent keys are prone to snapping.

​​Lubricate Regularly​​: Use dry graphite powder every 6 months.

​​Avoid Excessive Force​​: Turn keys gently; never jiggle violently.

​​Duplicate High-Quality Keys​​: Avoid thin or poorly cut copies.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry