Multi Point T latch
50010 Folding T Handle Latch with Three-Point Locking
The 50010 is a recessed folding T handle latch for truck bodies, trailers, and container doors. The body is polished stainless steel, and the face measures 120 x 124 mm. It uses a three-point key-locking system to secure the door at multiple points.
We supply this folding T handle latch to truck body builders, trailer manufacturers, and container equipment assemblers. The pan has four installing holes, or four welding screws are available. The cam comes with two pins for attaching rods.
Key Specifications
| Model | 50010 |
|---|---|
| Material | Polished stainless steel |
| Locking Type | Three-point key-locking |
| Design | Recessed folding T handle |
| Size | 120 x 124 mm |
| Mounting | Four installing holes or four welding screws |
| Cam | Supplied with two pins for attaching rods |
| Gasket | Available |
| Key Codes | Different key codes available |
Confirm door thickness, rod length, and keying requirement before ordering. We can advise on gasket and cam setup for your application.
Technical Drawing
Where This Three-Point Folding T Handle Latch Performs Best
Truck Body Doors
Three-point locking secures the door at top and bottom as well as the center. Polished stainless steel resists road spray.
Trailer and Container Doors
The cam has two pins for attaching rods, so you can drive multiple latch points from one handle location.
Flexible Mounting
Four installing holes suit bolt-on assembly. Four welding screws suit fabricators who weld the pan before painting.
Selection Data We Need from You
To confirm the 50010 folding T handle latch fits your program, please send:
- Door thickness and panel cut-out dimensions
- Rod length and routing path for the three-point linkage
- Mounting preference: four installing holes or four welding screws
- Keying requirement and key code
- Whether a gasket is needed for weather sealing
- Estimated annual quantity and destination country
Related Product Categories
We manufacture folding T handle latches, paddle handle locks, and truck body hardware. Related pages:
- Folding T-handle Latches for Cabinets and Vehicles
- 50011 Folding T Handle Trailer Lock
- About Our Factory and Quality Control
For custom rod lengths, private-label keys, or a gasket version, contact our engineering team through the inquiry form.
Frequently Asked Questions
It means the latch drives a three-point locking system, securing the door at multiple points when the key is turned. This gives a more even seal and greater resistance to forced opening than a single-point latch.
The cam comes with two pins for attaching rods. The rods connect to these pins and run to the remote latch points on your truck body or container door.
Choose the installing holes if you want to bolt the pan on during final assembly. Choose the welding screws if your process welds the pan to the door before painting. Both versions use the same lock body.
Yes. Different key codes are available. Tell us your keying requirement in the inquiry, including keyed alike groups or a master key system if needed.
Hot Tags: Multi Point T latch, China, manufacturers, suppliers, factory, customized, general, CABINET LOCK BLACK LOCK, Gerenal Non locking Folding T handle latch, Gerenal trailer lock, padlocking T handle latch, Two point Folding T handle latch, Non locking Folding T handle lock
Previous
Truck Tool Box LockYou Might Also Like
Send Inquiry