The invention relates to a front mount cylinder used for door locks, particularly a lock, the lock device includes a cylinder lock, the cylinder lock will not lock with the case opened the door to get from the front lock or insert.
Number of locks including cylinder lock, the cylinder lock is located in the door controls, such as knobs, or in a deadlock within the protective ring. The lock cylinder including cylinder, the cylinder does not have to accept the column lock cylinder the cylindrical holes, thus at the hole in the lock cylinder rotation. Cylinder and cylinder are equipped with multiple holes aligned, the holes used to accept and support more inward pressure of sliding by a spring PIN. Generally speaking, many pins through the cylinders and cylinder relative to the adjacent surfaces of the connector, which prevents lock cylinder rotation. These connectors are called "cut".
Lock cylinder with keys on slots, which communicated with the hole on the lock slot and PIN will extend into the key slot. When you fit the key into the key slot when the teeth on the key will adjust the pin position, thereby eliminating the cut block, so that the lock cylinder can rotation in the cylinder bore.
In certain locks, mounted at the back of the cylinder lock from locking device. If you need to remove the cylinder lock, the locking device must be removed from the door, and then break the lock to be removed from the control level of the cylinder lock. If you need to replace the lock cylinder, you need to spend the same time and the same tedious steps.
Other types of locks with cylinder lock, the cylinder lock from the controls or protective ring in front of a deadlock. The locks prevent rear mount cylinder lock encountered difficulties. This lock is useful, for example, can be used to require or intend to change on the basis of common cylinder lock combinations for the occasion. For example, when users key in existing lock and keep the key inserted status, users can easily use the front-end loading technology, using a different encoding to replace the cylinder lock.
Although front-end loading technology can streamline the procedures for replacing cylinder lock, but the available front mount cylinder lock structure is complex, long and complicated steps of assembling the cylinder lock. The result, the high cost of the lock. So in the past, people have tried to reduce the cylinder lock is fully at the expense of reducing the cost of locking.
Therefore you need to provide a front mount cylinder lock, the cylinder lock can be locked to keep higher safety and low cost.
According to the needs described above, object of the present invention is to provide a front mount cylinder locks, the corresponding lock cylinder lock can be relatively easily exited or inserted.
Another object of this invention is to provide a front mount cylinder lock, the cylinder lock, low cost and it can keep the corresponding lock high security.
For these and other purposes, the present invention provides an assemblage of lock cylinder lock, the lock cylinder including cylinder, the cylinder has accepted lock channel. The lock can be turned in the channel, which separated with more than one hole a certain distance, the holes along the cut line and cylinder formed of multiple holes aligned accordingly. Each pair of aligned holes in the mount has a pair of sliding pins and springs, one of the most inside the PIN into the lock cylinder of axial Groove, and part of the PIN for his cut, so as to prevent the lock cylinder rotation. Along the side of the cylinder to extend support, which supports at least partially contain the lock, the lock does not support fixed, relative lock support freedom of movement, has arrived in support, the inward pressure contact with lock, for the usually press the locking cylinder axis of the channel. In appearance part of the lock in the locked planes equipped with vibrating trough, which communicated with the axial slot of the lock slot and align with the lock so that you can lock press against the above string slot.
The other purpose of the invention, feature and benefit from best practice examples are given below for detailed descriptions, drawings and the claims annexed to easily draw.
